Daintree® WA100-PM

The WA100-PM Wireless Adapter provides control of dimmable drivers. It can monitor energy consumption of lighting devices on the Daintree Networked platform.
DLC_Standard_Icon Daintree_Icon

Features & Benefits

  • Works on Daintree Networked Wireless Controls System
  • AC powered device that provides On/Off switching as well as 0-10V analog dimming control for LED drivers and ballasts
  • Provides power for low voltage occupancy sensors, photosensors (daylight harvesters), wall switches, and control signals
  • Monitors and measures the power consumption of the connected lighting load and reports power measurement data to Daintree Controls Software
  • Provides the wireless adaptation that enables connected devices to communicate with the rest of the Daintree Networked wireless control solution
Utility Rebates
Where To Buy
SPEC SHEET

Specifications

Controls Platform
Daintree Networked
Color Offering
White
Mounting Options
Snap-in 1/2” nipple for junction box mount, Screw tab and optional mounting bracket for in-fixture mount
Analog Input
0-10V, Max 24V, Input resistance ~90K
Analog Output
0-10V, Max 24V, Input resistance ~90K
Low Voltage Output
24VDC, 75mA
Current Consumption
0.54W @120V (Idle, Relay OFF), 0.82W @277V (Idle, Relay OFF), 0.96W @120V (Relay ON), 1.23W @277V (Relay ON)
Binary Input
Active high (≥ 8.25V). Max 40V, Impedance ~22K
Radio Properties
2.4 GHz, +8dBm transmit power
Operating Temp
-20 to 65 °C
Width
1.7
Height
9.33
Certifications
CSA, DLC, FCC
Ratings
Dry
Warranty
5 year limited warranty

Product Documents

Enables Communication

The WA100-PM includes a 15A relay to switch ballasts/drivers and circuits, and provides 0-10V output to control one or more dimmable ballasts/drivers. It can also adapt low voltage occupancy sensors, photosensors, and wall switches/dimmers, enabling these devices to communicate wirelessly with the rest of the system.

Versatility

The WA100-PM provides added versatility with support for bi-level and alternate switching ballast configurations, as well as the ability to control an auxiliary relays or dependent devices.

Daintree Networked Enabled

The WA100-PM also includes the capability to monitor and measure the energy consumption of the lighting load being controlled, whether it is an entire circuit or a single light.

Related Products

Daintree® WWD1

The WWD1 is a battery-powered, wireless decorator-style dimmable wall switch that provides lighting control on the Daintree Networked wireless lighting controls plat...
View Product

Daintree® WWS3

The WWS3 is a battery-powered, wireless 3-button switch scene controller that takes the place of a standard wall switch on the Daintree Networked platform.
View Product

Daintree® WPS1

The WPS1 is a battery-powered indoor photosensor that is used to monitor and measure task or ambient light levels on the Daintree Networked platform.
View Product

Daintree® WAC60

The WAC60 Wireless Area Controller is the heart of the Daintree Networked platform. It communicates with Daintree Networked devices across a distributed network.
View Product

Daintree® WWD2-2

The WWD2-2 is a battery-powered, decorator-style dimmer wall light switch that provides lighting control on the Daintree EZ Connect or Daintree Networked platforms.
View Product

Daintree® WWD2-4

The WWD2-4 is a battery-powered, wireless decorator-style scene switch that provides lighting control on the Daintree Networked platform.
View Product

Daintree® WOS2

WOS2 wireless Passive Infrared (PIR) battery-powered indoor occupancy sensors, provide zonal lighting control on the Daintree Networked Wireless Controls platform.
View Product

Daintree® WGA100

The WGA100 general purpose adaptor provides On/Off switching and 0-10V analog control of devices such as pumps, motors and fans on the Daintree Networked platform.
View Product

Daintree® WMZ10

WMZ10 is a people counting sensor on the Daintree Networked Controls platform. It enables IoT applications like heat mapping and people counting for space utilizatio...
View Product

Daintree® WFA100-SN

The WFA100-SN is a wireless fixture adaptor, providing ON/OFF and 0-10V dimming control of ballasts and LED drivers on the Daintree Networked platform.
View Product