Daintree® WHS20

The Daintree WHS20 is a High-Bay occupancy sensor and an ambient light sensor. It is available as an integrated component with many Albeo® High Bay fixtures.

Features & Benefits

  • Works on Daintree ONE and Daintree Networked Wireless Controls systems
  • Provides Occupancy Sensing and Daylight Harvesting in one device
  • Commissioned with WHR1 Remote or on the Daintree Networked system
  • Available in bottom or side mount on Albeo® High Bay Lighting Fixtures
  • Provides Energy Code Compliance
Where To Buy
SPEC SHEET

Specifications

Controls Platform
Daintree One, Daintree Networked, Daintree EZ Connect
Occupancy Detection
PIR technology
Ambient Light Detection
Yes
Lensing
Low: 8ft (Order separately), Medium: 20ft (Order separately), High: 33ft (Standard), 360° or Aisle
Input Voltage
24VDC, 250mA Max
Current Consumption
< 0.5Wz
Driver Compatibility
Digital Addressable (DA), Digital Power Bus
Radio Properties
2.4GHz, +10dBm transmit power
Connectivity Protocol
Zigbee PRO (HA, BA), Bidirectional IR
LED Status Indicators
Green LED: Occupancy Detection, Red LED: Off for Normal Operation
Operating Temp
-40 to 70 °C
Height
2.11 In
Diameter
3.15 In
Ratings
NSF, IP66, IP69K (when installed in similarly rated fixture), Damp
Warranty
5 year limited warranty

Product Documents

Full-Featured Sensing and Control in One Sensor

Daintree WHS20 sensor features occupancy sensing and 0-10V dimming capability in one cost-effective sensor. The WHS20 also allows daylight harvesting, which saves additional energy costs, especially in warehouses with skylights.

Pre-Installed in Albeo® High Bay Fixtures

Available in bottom mount or side-mount options, the Daintree WHS20 comes pre-installed in many Albeo® High Bay Luminaires. This makes installation fast, easy and compliant with many of the widely accepted Energy Codes.

Upgradable & Intuitive

The Daintree WHS20 High Bay Sensor can be programmed in Daintree ONE mode with the WHR1 remote. This remote provides effective 2-way communication between the sensor and the remote, ensuring successful programming. The remote provides a easy-to-use graphical interface making the commissioning process easy. The sensor can also be upgraded to Daintree Networked for full functioning and network scheduling.