Daintree® WFA100-SN

The WFA100-SN is a wireless fixture adaptor, providing ON/OFF and 0-10V dimming control of ballasts and LED drivers on the Daintree Networked platform.
Daintree

Features & Benefits

  • Works on Daintree Networked Wireless Controls System
  • AC powered devices that provide On/Off switching and 0-10V analog dimming control for ballasts and LED drivers
  • Provides power and signal connections for low voltage occupancy sensors and photosensors
  • Automatically configures itself for the type of sensor(s) it is connected to
  • Provides wireless adaptation that enables connected devices to communicate with the rest of the Daintree Networked wireless lighting control solution
Utility Rebates
Where To Buy
SPEC SHEET

Specifications

Controls Platform
Daintree Networked
Color Offering
White
Mounting Options
In-fixture/enclosure screw installation
Ballast/Driver Control
On/Off
Analog Input
0-10VDC (photosensor)
Analog Output
0-10VDC
Input Voltage
120-277 VAC
Low Voltage Output
24VDC, 35mA
Current Consumption
0.72W @120V (Idle, Relay OFF), 0.72W @277V (Idle, Relay OFF), 1.18W @120V (Relay ON), 1.18W @277V (Relay ON)
Dimming Output
0-10V, 5mA (sink or source)
Radio Properties
2.4 GHz, +8dBm transmit power
LED Status Indicators
Green LED (power, joined network) , Red LED (error state)
Operating Temp
-25 to 70 °C
Length
7.03 In
Width
1.18 In
Height
0.98 In
Certifications
UL, DLC, FCC
Ratings
RoHS, Dry
Warranty
5 year limited warranty

Product Documents

Sterile patient room in hospital

Cost Effective

The WFA100-SN is a cost-effective wireless control solution, providing ON/OFF and 0-10V dimming control of ballasts and LED drivers. The isolated relay offers N/O and N/C contacts providing robust switching options to control a variety of loads.

Versatility

Its compact form factor provides for simple installation and makes it an extremely versatile solution for a wide range of fixture types and sizes. It can also adapt low voltage occupancy and photo sensors to enable these devices to be controlled wirelessly. The adapter also serves as a communication router in the ZigBee wireless mesh network. Control signals pass between the adapter and the Wireless Area Controller in the CSM network.

Daintree Networked multi-site graphic
Daintree Networked System Architecture How it works infographic

Daintree Networked

Daintree Networked provides the infrastructure for feature-rich commercial lighting control for LED lighting. The Daintree Networked system also allows interconnectivity with other systems like HVAC, Plug Load control, fans, water heaters, air compressors and refrigeration units. The Daintree Networked platform allows building owners and managers the ability to monitor and resolve energy performance with the Daintree apps. Daintree Networked allows customers to go beyond lighting control and into the world of IoT.

Related Products

Daintree Networked WA100-PM Wireless Lighting Controls adapter for control of 0-10V dimming drivers

Daintree® WA100-PM

The WA100-PM Wireless Adapter provides control of dimmable drivers. It can monitor energy consumption of lighting devices on the Daintree Networked platform.
View Product
Daintree Networked Wireless Lighting Controls WGA100 general purpose adapter for control of pumps, fans, motors for on/off switching or 0-10V analog control

Daintree® WGA100

The WGA100 general purpose adaptor provides On/Off switching and 0-10V analog control of devices such as pumps, motors and fans on the Daintree Networked platform.
View Product
Daintree Networked Wireless Lighting Control WSA10 adaptor for communication with HVAC sensors

Daintree® WSA10

The Daintree Networked WSA10 wireless sensor adaptor has multiple thermistor temperature sensors and 0-10V inputs for communication with a variety of HVAC sensors.
View Product
Daintree Wireless Area Controller WAC60 Gateway

Daintree® WAC60

The WAC60 Wireless Area Controller is the heart of the Daintree Networked platform. It communicates with Daintree Networked devices across a distributed network.
View Product
WWD2-2 Front View

Daintree® WWD2-2

The WWD2-2 is a battery-powered, decorator-style dimmer wall light switch that provides lighting control on the Daintree EZ Connect or Daintree Networked platforms.
View Product
WWD2-4 Front View

Daintree® WWD2-4

The WWD2-4 is a battery-powered, wireless decorator-style scene switch that provides lighting control on the Daintree Networked platform.
View Product
Daintree Networked Wireless Lighting Contols RRU-X-UNV Automatic Load Control Relay or Shunt Relay for emergency lighting purposes

Daintree® RRU-X-UNV

The RRU-X-UNV automatic load control relay is suitable for bypassing line voltage relay/switch and breaking the 0-10V line for full brightness operation.
View Product

DLC qualified models available. Please refer to http://www.designlights.org/QPL for complete info.