Interoperable Devices

The DSW-302 dual technology wall switch sensor turns lights ON and OFF based on occupancy and contains two relays for controlling two independent lighting loads or circuits. It combines the benefits of passive infrared (PIR) and ultrasonic detection technologies for high sensitivity to small and large movements.

The InteliSwitch TS-400 series digital time switches automatically turn lights off after a preset time. The simple pushbutton operation provides users with convenient time out lighting control without the nuisance of twist timers.

The InteliSwitch TS-400 series digital time switches automatically turn lights off after a preset time. The simple pushbutton operation provides users with convenient time out lighting control without the nuisance of twist timers.

Connect the USB port on your computer, laptop or Ultrabook to a wired Ethernet network. Access true Gigabit network speeds without the expense and hassle of adding an internal Ethernet card to your device.

The USOPTL4 is an isolated USB to RS-422/485 converter that enables you to safely add an industrial-grade serial port to any USB only PC while protecting it from hazardous ground loops and voltage spikes.

The TL-SG1008PE is an 8-Port Gigabit Desktop/Rack mountable Switch with all 8 ports supporting the PoE+ standard. It provides a simple way to expand a wired network by transferring power and data over a single Ethernet Cable.

Plug and Play, with PoE Transmission for Surveillance up to 250 m

The RRU-X-UNV includes dual relays and is suitable for simultaneously bypassing a line voltage relay/switch and breaking the 0-10V line for full brightness operation. Its small size is ideal for fixture mounting alongside wireless lighting controls.

The BZ-200 power pack switches connected loads On and Off in response to Wattstopper low voltage occupancy sensors. It also provides up to 225mA at 24VDC to power the sensors.

The CR9580 Series Current Sensors provides a cost effective method for monitoring electrical current. The sensor generates a 0-5 VDC signal proportional to the input AC current. The output signal is average sensing, calibrated to RMS. The sensor is used with process control and industrial instrumentation equipment.

The CR9580 Series Current Sensors provides a cost effective method for monitoring electrical current. The sensor generates a 0-5 VDC signal proportional to the input AC current. The output signal is average sensing, calibrated to RMS. The sensor is used with process control and industrial instrumentation equipment.

The Lumina RF Decora Rocker Switch (ZSS10) is a robust rocker manual switch used to provide wireless control of lighting loads including high-inrush LED loads. The ZSS10 wall switch is compatible with other 2.4GHz Lumina RF wireless products.